More
than 60 years after the production of the first Borgo
dynamic balancing machine and almost 20 years after the sale
of our business to another company, the stock of spare parts
remaining has almost completely run out.
Among the most requested spare parts are still available the copper contact braids for the supports of the MAB 140 and MAB 200 crack detectors (code MB330100).
The sensor coils
of the supports of all the soft bearing balancing machines,
once produced directly by Borgo, are no longer available and
must be regenerated with a new winding made with 1500 turns
of 0.04 mm copper wire so as to obtain a resistance of
approximately 2200-2300 Ohm.The wire must be distributed uniformly in the Ø 32.9 mm groove of the coil and must remain under
its external diameter of 34.3 mm.
The
C80BK gauges of the ED series dynamic balancing machines
with vector screens can currently still be requested from the company that
produced them for Borgo.
The unbalance
display modules of the digital instruments of the EDC or
PHE series are difficult to repair owing to the unavailability of their
obsolete electronic components, but it is normally possible to repair the control module
(the first on the left, whose front panel includes the Storage button) when
the fault is due to the failure of the voltage regulators of the power supply board, which
are easily replaceable.
The unbalance
display modules of the digital instruments of the EDC orPHE series are difficult to repair owing to the unavailability of their
obsolete electronic components, but it is normally possible to repair the control module
(the first on the left, whose front panel includes the Storage button) when
the fault is due to the failure of the voltage regulators of the power supply board, which
are easily replaceable.
The 9" black and white CRT screen of
the RB measuring cabinets and the 14" color
screen of the RM cabinets are no longer available, but they can be replaced with color
TFT displays of equivalent size.
The motherboard of the PC integrated into the cabinet usually stops working correctly
when its battery is empty.
The battery in almost all cards is inserted inside an integrated circuit (Real Time Clock).
Running out of battery causes the BIOS to return to the
default values ??that are not
suitable for the operation of the balancing software.
The Real Time Clock can be replaced and by restoring the BIOS parameters with the
correct values, the system returns to normal operation.
The values ??of the parameters to be restored can be communicated on request.
screen of the RM cabinets are no longer available, but they can be replaced with color
TFT displays of equivalent size.
The motherboard of the PC integrated into the cabinet usually stops working correctly
when its battery is empty.
The battery in almost all cards is inserted inside an integrated circuit (Real Time Clock).
Running out of battery causes the BIOS to return to the
default values ??that are not suitable for the operation of the balancing software.
The Real Time Clock can be replaced and by restoring the BIOS parameters with the
correct values, the system returns to normal operation.
The values ??of the parameters to be restored can be communicated on request.
RETROFIT
When the electronic cards of a digital
or computerized instrumentation are no longer available, nor
can they be repaired due to unavailability of their
components, it is possible to replace the instrumentation
with a new model corresponding to the current state of the
art.
Ask me for information about it.
Ask me for information about it.
Spare Parts 
